What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 28.06.2025 04:00
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
In schematic diagrams this is the symbol for a fuse:
2024–10–10[John johnson John Johnson ]
This is the picture of an electronic coil of wire wound around a core of magnetic material.
An AC voltage/ current source, and an ac inductive load.
Apple brings Apple Intelligence to the iPhone screen at WWDC 2025 - TechCrunch
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
A fuse is a non-resetable over current circuit protector.
First Sentence:
The Easiest Way to Lower Cortisol, According to a Longevity Expert - Vogue
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
[image of Common-mode choke]
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Resident Evil 9, Requiem, Announced At Summer Game Fest With Trailer And Release Date - GameSpot
Edit 2024–10.
The third is lightning and “how it gets conducted into a home.”
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Report: Steelers expect to have a deal with T.J. Watt by the start of the season - NBC Sports
eight
2024–10–16 [ OO OLAOYE OYEBODE ]
At least they know the answer if they wanted it.
Tigers Defeat West Virginia, 12-5, to Earn 2025 College World Series Berth - lsusports.net
2024–10–14 [Omar Gharbi Omar Gharbi ]
It seems Mohan does not understand the difference between a comment and an Answer.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
A circuit breaker is similar, but is resettable.
The bolt then partially travels down the line to your home.
These devices are installed between the “hot” and “neutral” and protective ground.
Report: Knicks have interest in Wolves' Chris Finch as new head coach - Sports Illustrated
Barnstars:
but this device (an Inductor) … impedes the rapid changes in the current.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
I'm 29. I have wasted 7 years for government exam preparation. What should I do?
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
One is “what exactly is in a ‘surge protector’ ? ”
Now when you have a certain ac resistance, then a current flows in a loop.
How can I be the smartest human on Earth?
I post the exact comment here.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Have you ever been physically attacked by a demon?
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
It also is a device that limits the change in current flow.
What does a fuse do?
Fast-Track to Happiness: One Week of Micro-Acts Makes a Difference - Neuroscience News
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
so, what happens?
the problem then depends on "how fast does the fuse operate?".
Box Office: ‘How to Train Your Dragon’ to Fly to $75 Million in Opening Weekend - Variety
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
This is 'the assistant's answer'
These are simplified answers to the original question, and does not change anything I wrote above.
Farewell, Mr. Eclipse: Fred Espenak dies at 71 - Astronomy Magazine
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
So, the voltage could go up to 500 volts, and the fuse will not open up.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
What is lightning?
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
(Dc diagram shown, AC is similar).
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
He then asserts :
[old diagram got deleted by accident]
He then describes Rainy Season and Lightning.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
There are two important concepts here.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Here is a simplified AC power diagram.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
But… the neutral is now “floating” because of the 1 ohm resistance.
At one ohm, the resistor has a maximum of 1 watt power.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
One
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
what exactly is a ‘surge’ protector?
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Because the load is inductive, the current lags the voltage.(by a bit).
This device then solves the entire problem.
a photo is worth a thousand words.
The MOV will conduct when the voltage exceeds 50% of line voltage.
This one hit behind the barn.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
There are three different concepts here that are getting confused.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
This is where this question deviates from being a 'generic' question, and becomes more specific.
The other is “what does a “fuse” do?”
Upvotes:
He then describes the function of a fuse.
But it can get overloaded, and no longer works.
nine
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
This is where the MOV conducts again, and dissipated the energy.
but I think this circuit , shows a few more pieces.
For this case there are devices called Metal oxide varistors (MOV).